Introduction of outside air
E00702200235
To introduce air into the vehicle during hot weath-
er, set the air selection lever to the “ ” (outside)
position and set the temperature control dial to the
positions shown in the illustration. Be sure to set
the temperature control dial all the way to the left.
Select the desired blower speed.
NOTE
l
Turn
the mode selection dial clockwise and
air will flow to the leg area and the windscreen.
Automatic air conditioning*
E00702400110
The air conditioning can only be used while the en-
gine is running.
Control panel
E00702501192
1- Mode selection dial
2-
Blower speed selection dial
3- Temperature control dial
4-
Rear window demister switch ® p. 3-40
5- Air conditioning switch
6- Air selection switch
NOTE
l
There
is an interior air temperature sensor
(A) in the illustrated position.
Never place anything on top of the sensor,
since doing so will prevent it from function-
ing properly.
Blower speed selection dial
E00702800273
Select the blower speed by turning the blower
speed selection dial clockwise or anticlockwise.
The
blower speed will gradually increase as the di-
al is turned to the right.
For pleasant driving
5-08
5
To Next Page
Loading...
Need help?
General
