Mitsubishi LT2-250 User Manual

OPERATION
] Selection of thread
It is recommended to use "S" twist thread in
the left needle (viewed from front), and "Z"
twist thread in the right needle.
When discriminate use of needle threads is im
possible, use "Z" twist thread in both the
needles. For bobbin thread, "S" twist thread as
well as "Z" twist thread can be used.
fT) Threading of needle threads
(1)Pass each needle thread through thread
guide (§).
Note: When thin slippery thread (polyester
thread or filament thread, for example) is
used, pass the thread through thread guide
as well.
(2) With the take-up lever located at the upper
most position, pass each needle thread in
the order shown in the following figure.
Note: Pressing the upper thread loosening
button shown in the figure below opens the
saucer of the upper thread tension adjuster,
and the upper thread can easily pulled out.
(LT2-230)
Needle thread tension releasing button
(0> (U
CTTXr 0
(TT)/ 7(See detailed figure.)
(rTT)
(ljI)—
Lead the Lead the
thread thread
leftward, rightward.
Needle
thread
"S" twist thread
'Z" twist thread
® (|) ®(D ®
(LT2-250)
Needle thread tension releasing button
Lead the Lead the
thread thread
leftward, rightward.
(^CpCEI)
(See detailed figure.)
Needle
thread
-6-
From the library of: Superior Sewing Machine & Supply LLC

Mitsubishi LT2-250 Specifications

General

Brand	Mitsubishi
Model	LT2-250
Category	Sewing Machine
Language	English