PREPARATIONBEFOREOPERATION
Turn the breaker ON.
Remove the back lid and insert
batteries. And then reattach the
back lid.
Do notconfuse
(+) and (-). J
Press the RESET button.
+1
Press it usinga
thin stick.
i After batteriesare replaced, pressthe resetbutton.
• Ifthe resetbuttonis not pressed, the remote controller
may not operatecorrectly.
Press the CLOCK SET button.
Press it usinga
thin stick.
_ Press the _ and _ button
(TIME SET button) to set the
current time.
ONIOFF(DYTOO {'i_ ATOO
O WARM_v COOL
CD GD
f
MODE
FAN VANE
CD (_
SWING
_)START E)STOP
Q
HR. o MIN.
<:_ =0c,C>
_-TJ
• Each time the Q button is pressed, the set time is
counted up by 1 hour, and each time the _ button
is pressed,the set time iscounted up by 1 minute.
Press the CLOCK SET button
again.
To Next Page
Loading...
