Mitsubishi MULTI-SERIES User Manual

In the weekly timer mode, select and commit
“
”.
Steps 1 to 5 in “Selecting Weekly Timer Modes“ on page 7
The remote controller shows the display shown to the left and
the settings for the number of the earliest timer operation for
the set day of the week.
Press the or switch.
The settings are displayed for each day of the week, in the
order of their setting numbers.
Press the
switch to display settings starting from Sunday,
in order from the smallest setting number.
Press the
switch to display the settings in the reverse
order.
“
” and “ ” are displayed
alternately.
1
2
■ Checking Weekly Timer Modes
Press the “ SET” switch.
“ ” is displayed.
Note: If you press the “
RESET” switch, the remote
controller will return to one screen earlier and display
“
”.
In the weekly timer mode, select and commit
“
”.
Steps 1 to 5 in “Selecting Weekly Timer Modes“ on page 7
The remote controller shows the display shown to the left and
the settings for the number of the earliest timer operation for
the set day of the week.
Press the or switch.
The settings are displayed for each day of the week, in the
order of their setting numbers.
Press the
switch to display settings starting from Sunday,
in order from the smallest setting number.
Press the
switch to display the settings in the reverse
order.
Select the day of the week and setting number corresponding
to the weekly timer setting you want to cancel.
“
” and “ ” are displayed
alternately.
3
1
2
■ Canceling Weekly Timer Mode Settings
It is possible to cancel weekly timer mode settings of each day of the week, as well as individual setting numbers.
See “Timer Operation Cancellation Mode” on page 12 to cancel settings of all the days of the week at once.
● If you press the “ ” switch while in the timer setting mode, the remote controller exits from the timer mode
and returns to the original display.
● If you do not press any switches for 60 seconds after entering the timer mode, the remote controller automatically exits from the
timer mode and returns to the original display.
NOTE
Press the “ SET” switch.
“ ” is displayed. The displayed setting
disappears and is canceled.
‚
“
” is displayed again.
Repeat steps 2 to 4 to continue canceling other settings.
4
11
2
3
2
5
3,4
Press the “ ” switch once.
The remote controller exits from the timer mode.
3
Press the “ ” switch once.
The remote controller exits from the timer mode.
5
PCA012A001J_E_P11 06.9.6, 10:4011

Mitsubishi MULTI-SERIES Specifications

General

Brand	Mitsubishi
Model	MULTI-SERIES
Category	Air Conditioner
Language	English