17
NOTE:
• Press button to transmit the setting information of weekly timer to the indoor unit. Point the remote controller toward the
indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
button does not have to be pressed per each
setting. Press
button once after all the settings are complete. All the weekly timer settings will be saved.
• Press
button to enter the weekly timer setting mode, and press and hold button for 5 seconds to erase all weekly
timer settings. Point the remote controller toward the indoor unit.
(4) Press
button to complete and transmit the weekly timer setting.
* which was blink-
ing goes out, and the
current time will be
displayed.
2. Checking weekly timer setting2. Checking weekly timer setting
(1) Press button to enter the weekly timer setting mode.
*
blinks.
(2) Press
or buttons to view the setting of the particular day or number.
(3) Press
button to exit the weekly timer setting.
NOTE:
When all days of the week are selected to view the settings and a different setting is included among them,
will be
displayed.
(5) Press
button to turn the weekly timer ON. ( lights.)
•When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press
button again to turn the weekly timer OFF. ( goes out.)
NOTE:
The saved settings will not be cleared when the weekly timer is turned OFF.
To Next Page
Loading...
Need help?
General
