Multi information display
switch
E00520000741
Each time the multi information display
switch is operated, the buzzer sounds and the
multi information display changes between
information such as warnings, tripmeter,
average and momentary fuel consumption,
distance range etc.
It is also possible to change elements such as
the language and units used on the multi in-
formation display by operating the multi in-
formation display switch.
Information screen (when the
ignition switch or the operation
mode is OFF)
E00520201867
Each time you lightly press the multi infor-
mation display switch, the display screen
switches in the following order.
*
1
: When there is no warning display
*
2
: When there is a warning display
1-
Tripmeter
® p. 5-09
2-
Tripmeter
® p. 5-09
3- AS&G monitor* ® p. 5-13
ECO score display* ® p. 5-13
4- Service reminder ® p. 5-09
5- Redisplay of a warning display screen
® p. 5-06
Information screen (when the
ignition switch is turned from
the “LOCK” position to the
“ON” position or the operation
mode is changed from OFF to
ON)
E00520700878
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the display screen switches in the fol-
lowing order.
*: When the inspection time has arrived
1- Screen when the ignition switch or the
operation mode is OFF
2- System check screen ® p. 5-11
3- Screen when the ignition switch or the
operation mode is ON
4- Service reminder ® p. 5-09
Multi information display - Type 1
5-05
OGFE16E1
Instruments and controls
5