5- Frozen road warning ® p. 5-24
6- Gearshift indicator* ® p. 6-33
7- Selector lever position display*
® p. 6-38, 6-45
8- Service reminder ® p. 5-09
9- Information display ® p. 5-21
10- Fuel remaining display ® p. 5-24
Refer “Multi information display - Type
1” on page 5-03 or “Multi information
display - Type 2” on page 5-20.
Electronically controlled 4WD
system*
E08501701058
The electronically controlled 4WD system is
a 4-wheel drive system that allows one of
three drive modes to be selected with the
switch, in accordance with the driving condi-
tions.
Drive mode Function
4WD ECO This mode is for eco-
nomical driving.
Usually, driving
mode is 2WD for
economy but the per-
formance of 4WD is
produced according
to the slip of a wheel.
Drive mode Function
4WD AUTO This mode is for au-
tomatically control-
ling the distribution
of driving torque to
all four wheels ac-
cording to the driv-
ing conditions.
4WD LOCK This mode is for
driving in slippery
conditions such as on
snow-covered roads
or sand.
The large amount of
driving torque that is
applied to the rear
tyres enables getting
out of slippery areas
and powerful driving
is possible across all
ranges.
Drive mode-selector
The drive mode can be switched by press the
switch while the ignition switch is in the
“ON” position or the operation mode in ON.
Refer to “Electronically controlled 4WD
system” on page 6-51.
S-AWC control mode
E08501900037
S-AWC is an integrated vehicle dynamics
control system that helps enhance driving
performance, cornering performance, and ve-
hicle stability over a wide range of driving
conditions through integrated management of
the electronically controlled 4WD, the AYC
(Active Yaw Control), the ABS and the ASC.
Quick guide
1-18
OGFE16E1
Overview/Quick guide
1
To Next Page
Loading...
Need help?
General
