Mitsubishi Outlander 2015 User Manual

NOTE
l
Press the switch one by one.
l
The Speed Limiter may be cancelled auto-
matically, if two or more switches are press-
ed at the same time.
Speed Limiter information on
the multi information display
area
E00633401053
The Speed Limiter information is displayed
on the multi information display area in the
combination meter.
mono-color liquid crystal display
color liquid crystal display
A-Control state
There are 3 control states as below.
LIMIT OFF
When the Speed Limiter is in STAND-
BY, the vehicle speed can exceed the set
speed
LIMIT
When the Speed Limiter is in operation.
The vehicle is controlled in order not to
exceed the set speed.
OVER LIMIT
When the vehicle speed is exceeding the
set speed by more than about 3 km/h
(2 mph) (Except for mono-colour liquid
crystal display)
B-SPEED LIMITER ON indication
When the Speed Limiter is started up, the
Speed Limiter’s symbol is appeared.
C-Set speed
Set speed is appeared if it is stored.
To start up
E00633500015
First of all, press the ON/OFF switch in order
to power up the Speed Limiter when the igni-
tion switch in the “ON”, position or the oper-
ation mode in ON,
The Speed Limiter indication will be ap-
peared in the combination meter.
mono-colour liquid crystal display
colour liquid crystal display
Speed Limiter*
6-75
OGFE16E1
Starting and driving
6

Mitsubishi Outlander 2015 Specifications

General

Brand	Mitsubishi
Model	Outlander 2015
Category	Automobile
Language	English