Mitsubishi OUTLANDER Owner's Manual

The distance and speed units are also switched in
the following combinations to match the selected
fuel consumption unit.
Fuel consump-
tion
Distance
(driving range)
Speed
(average speed)
L/100 km km km/h
mpg (US) mile(s) mph
mpg (UK) mile(s) mph
km/L km km/h
Changing the temperature unit
E00523100570
The display unit for temperature can be switched.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-17.
2. Lightly press the multi-information meter
switch to select “ ” (temperature unit set-
ting).
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
in sequence from °C → °F → °C.
The setting is changed to the selected temper-
ature unit.
NOTE
l
If the battery is disconnected, the unit setting
is erased from memory and is automatically
set to °C.
Changing the display language
E00523200308
The language of the multi-information display can
be switched.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to “Changing the function settings
(when the ignition switch is “ON”)” on page
3-17.
2. Lightly press the multi-information meter
switch to select “LANGUAGE” (language
setting).
Type 1
Type 2
3. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play “LANGUAGE” (language setting).
Instruments and controls
3-20
3

Mitsubishi OUTLANDER Specifications

General

Brand	Mitsubishi
Model	OUTLANDER
Category	Automobile
Language	English