When the setting is changed, a sound is emit-
ted and the indication lamp flashes.
• When the setting is changed from enable
to disable 3 sounds are emitted and the in-
dication lamp flashes 3 times.
• When the setting is changed from disable
to enable 2 sounds are emitted and the in-
dication lamp flashes 3 times.
NOTE
l
The factory setting is “Enable automatic air
conditioning control”.
l
When you turn the mode selection dial to
“ ”, in order to prevent misting of the win-
dows the air conditioning operates automati-
cally even if “Disable automatic air condition-
ing control” is set.
Operating the system in automatic
mode
E00704101020
In normal conditions, use the system in the AUTO
mode and follow these procedures:
1. Set the blower speed selection dial to the “AU-
TO” position.
2. Set the temperature control dial to the de-
sired temperature.
3. Set the mode selection dial to the “AUTO”
position.
The outlet position (except “ ”), recirculation/out-
side air select and blower speed, and ON/OFF of
air conditioning will be controlled automatically.
To stop the system, turn the blower speed selection
dial to the “OFF” position.
CAUTION
l
When using the air conditioning, the
idling speed may slightly increase as the
air conditioning compressor is switched
on/off automatically. While the vehicle
with an A/T, CVT or Twin Clutch SST is
stationary, fully depress the brake pedal
to prevent the vehicle from creeping.
NOTE
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windscreen and win-
dows from fogging up, the ventilator mode
will be changed to “ ” and the blower
speed will be reduced.
l
If the blower speed selection dial, air condi-
tioning switch, mode selection dial, or air se-
lection switch is operated while the system is
operating in the AUTO mode, the activated
function overrides the corresponding func-
tion of automatic control. All other functions
remain under automatic control.
Operating the system in manual air
mode
E00704200167
Blower speed and ventilator mode may be control-
led manually by setting the blower speed selection
dial and the mode selection dial to the desired posi-
tions. To return to automatic operation, set the dials
to the “AUTO” position.
Demisting of the windscreen and door windows
E00704300852
CAUTION
l
For safety, make sure you have a clear
view through all the windows.
Use the mode selection dial (“ ” or “ ”) to re-
move frost or mist from the windscreen or door win-
dows.
For pleasant driving
5-07
5
To Next Page
Loading...
Need help?
General
