Press
: The file number increases by
one.
Press
: The file number decreases by
one.
Press for a
long period
(approx. 2 sec-
onds or more)
: The file number increases con-
tinuously while the button is
pressed.
Press for a
long period
(approx. 2 sec-
onds or more)
: The file number decreases con-
tinuously while the button is
pressed.
If the side of the button is pressed once after a
few seconds, playback returns to the start of that
track.
NOTE
l
Every time the TRACK button (13) is press-
ed, the file number in the display changes.
To find a track
E00758600180
You can select a folder to find a desired track.
1. Turn the FOLDER switch (12) to show the
desired folder in the display.
NOTE
l
If no operation is performed for 10 seconds
or more or other button is operated after the
FOLDER switch has been turned, the selec-
ted track becomes unselected and the display
returns to the playback display.
2. Press the FOLDER switch (12) to select the
folder.
NOTE
l
When the DISC UP button (10) is pressed,
the selected folder is played from the begin-
ning.
3. Turn the FOLDER switch (12) to show the
desired track in the display.
NOTE
l
If no operation is performed for 5 seconds or
more after the FOLDER switch (12) is
turned, the displayed track is played.
4. Press the FOLDER switch (12) to select the
file.
To play the same file repeatedly
E00758700019
Press the RPT button (6) to show “RPT” in the dis-
play. To cancel this mode, press the button again.
To play the files in the same folder repeatedly
E00758800010
Press and hold the RPT button (6) until you hear a
beep to show “D-RPT” in the display.
All tracks in the current folder are played repeatedly.
To exit this mode, press the button again.
To play a folder in random order
E00758900011
Press the RDM button (7) to show “RDM” in the
display.
The audio randomly selects tracks from the current
folder and plays the selected tracks.
To exit this mode, press the button again.
To play all folders in random order
E00759000019
Press and hold the RDM button (7) until you hear a
beep to show “D-RDM” in the display.
The audio randomly selects tracks from all folders
and plays the selected tracks.
To exit this mode, press the button again.
To find the start of each track in a folder for play-
back
E00759100010
Press the SCAN button (11). “SCAN” is shown in
the display and the tracks in the current folder are
played for several seconds from the beginning.
The file number flashes during this cueing playback.
To exit this mode, press the button again.
NOTE
l
Once all tracks in the folder have been cued
playback will restart from the beginning of
the track that was playing when cueing started.
To find the start of first tracks in all folders for
playback
E00759200011
Press and hold the SCAN button (11) until you
hear a beep to show “F-SCAN” in the display.
The first tracks in all folders are played for several
seconds from the beginning.
Playback starts from the folder next to the one cur-
rently playing.
The folder number flashes during this cueing play-
back.
To exit this mode, press the button again.
NOTE
l
Once the cueing playback ends, playback
will start from the track at the beginning of
the folder next to the one that was playing
when the cueing started.
For pleasant driving
5-47
5
To Next Page
Loading...
Need help?
General
