EasyManuals Logo

Mitsubishi OUTLANDER Owner's Manual

Mitsubishi OUTLANDER
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
6. While pushing the lock release button (A), re-
move the cover of the ignition switch.
7. Insert the emergency key into the ignition
switch.
8. Insert the keyless operation key into the emer-
gency key.
9. Turn the emergency key with keyless opera-
tion key to the “ON” position.
The diesel preheat indication lamp will first
illuminate, and then after a short time go out,
indicating that preheating is completed.
NOTE
l
If the engine is cold, the diesel preheat indi-
cation lamp is on for a longer time.
l
On vehicles with Twin Clutch SST, when the
engine has not been started within about 5 sec-
onds after the diesel preheat indication lamp
went out, return the ignition switch to the
“LOCK” position. Then, turn the key to the
“ON” position to preheat the engine again.
l
When the engine is warm, the diesel preheat
indication lamp does not come on even if the
emergency key is placed in the “ON” position.
Start the engine by turning the emergency
key right to the “START” position.
10. Turn the emergency key with the keyless op-
eration key to the “START” position without
depressing the accelerator pedal, and release
it when the engine starts.
NOTE
l
Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.
11. Remove the keyless operation key from the
emergency key.
WARNING
l
Make sure to remove the keyless opera-
tion key from the emergency key after
the engine is started.
If not removed, the keyless operation key
could fall to the floor, which could dis-
turb the pedal operation.
NOTE
l
If the emergency key is attached to a key hold-
er, it may become impossible to insert the key-
less operation key into the emergency key,
and it may prevent the engine from being star-
ted. When using the emergency key to start
the engine, first remove the key from the key
ring.
Using the MIVEC engine
The MIVEC engine automatically switches its in-
take-valve control between a low-speed mode and
a high-speed mode in accordance with driving con-
ditions for maximum engine performance.
Locking and unlocking
1-23
1

Table of Contents

Other manuals for Mitsubishi OUTLANDER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi OUTLANDER and is the answer not in the manual?

Mitsubishi OUTLANDER Specifications

General IconGeneral
BrandMitsubishi
ModelOUTLANDER
CategoryAutomobile
LanguageEnglish

Related product manuals