Mitsubishi P91DW User Manual

24
15
SPECIFICATIONS
Type: Digital Monochrome Printer
Model: P91DW
Power supply and
power consumption: 120V AC, 50/60Hz, 1.4A
220-240V AC, 50/60Hz, 0.8A
Connection terminal: Parallel data interface (36 pin female type)
Dot resolution: 1024 x 1024 pixels (Standard)
(Max. 1024 x 5120 pixels)
Gradation: 256 gradations
Printing speed: 5.1 sec (Standard)
Print size: 4" x 4" (100mm x 100mm) (Standard)
(Max. 4" x 20" (100mm x 500mm))
Operating conditions: Temperature 41 - 104˚F (5-40˚C)
Humidity 20 - 80% RH (No dewing)
External dimensions: 6.1" x 3.8" x 11.8" (154mm x 97mm x 300mm); W x H x D
Weight: 6.8 lbs (3.1kg)
Standard accessories: AC power cord ........................................................... 1 piece
Thermal paper K65HM .................................................. 1 roll
Cleaning paper .......................................................... 1 sheet
Printer driver ...................................................... 1 floppy disk
Optional accessory: Thermal paper K65HM, K65H, K61B, K61S
SERVICE INFORMATION
Before requesting service please review this operation manual to correct minor complaints.
If you are unable to correct the problem, consult your MITSUBISHI Dealer or MITSUBISHI
Service Department.
DO NOT ADJUST ANY CONTROLS NOT DESCRIBED IN THIS OPERATION MANUAL.
DO NOT REMOVE THE PROTECTIVE ENCLOSURE OF THIS UNIT.

Mitsubishi P91DW Specifications

General

Brand	Mitsubishi
Model	P91DW
Category	Printer
Language	English