3-10
Chapter 3 Cooling, heating and air conditioning systems
12.14b The control valve should be fully closed (lever “up”) with
the heater control lever in the OFF position (move the cable
housing in the securing clip to adjust it) (pre-1988 models)
12.14~ To adjust the DEF-HEAT-VENT damper, move
the cable housing in the securing clip (pre-1988 models)
12 .I9 Heater unit - exploded view
(1988 and later models)
7 Heater hose connections
2 Instrument panel
3 Main duct
4 Center ventilator duct
5 Defroster duct
6 Center reinforcements
7 Heater unit
8 Grommet
To Next Page
Loading...
