2. Program timer (PLH-P1.6 / 2 / 2.5KAH1.UK)
Part No. PAC-YT32PTA
A SET/MONITOR DISPLAY:
When SET is displayed, clock adjustment,
change of day, and daily and weekly timer
settings can be performed. When MONI-
TOR is displayed, all switches except SET/
MONITOR SW are invalidated. This is nor-
mal status.
B Y WEEKL AY:
Used to select whether the operation pat-
tern set using the PATTERN canSETTING
be applied to different days of the week.
C CURRENT DA AY:Y DISPL
Indicates the current day.
D CURRENT TIME DISPLAY:
During MONITOR status, current time is
display.
During daily timer setting, a time desire
for timer setting is displayed.
E OPERA AY:TION MODE DISPL
Indicates the operation mode.
F DAILY AYTIMER SETTING DISPL :
24 hours is divided into 48 blocks and each
block is expressed in 30 minutes.
The block display consists of 3 patterns.
G SET BACK DISPLAY
Indicates the set back value.
1 SET/MONITOR Button
Using this switch, select “MONITOR” or “SET” Mode.
“MONITOR”: Indicates the current timer setting. All switches expect
MODE SELECTOR SW are inv
alidated
then. This is the
normal status.
“SET”: Set to “SET” mode for clock adjustment, change of day
and daily and weekly timer settings.
2 MODE A/B/OFF Button
Used for setting timer in day of week unit.
3 CLOCK ADJUSTMENT Button
Used for adjustment of the current time.
Push [
] SW to advance the time. Each time the button is pushed
the time advances by 1 minute, pushing continuously advances by
1 minute at 0.5 second intervals, and when the lower digit of the
minute becomes “0” the time advances in 10 minute units.
[
] SW is used for reversing the time. Each time the button is
pushed the time reverses by 1 minute, pushing continuously re-
verses the time by 1 minute at 0.5 second intervals, and when the
lower digit of the minute becomes “0” the time reverses in 10 minute
units.
4 DAY SETTING Button
Used when setting the day.
5 WEEK DAY SETTING Button
Used for week day setting.
Pushing [
] SW moves the week day light display in order of S M
T W ... enabling to set the week day.
6 SET BACK SETTING Button
Used for set back setting.
Set back can be done in the range of 1, 2, 4, 6 and 8
C (2, 4, 8, 12 and
16
F).
7 ON/OFF/SET BACK Button
Used to specify the time setting pattern.
8 DAILY TIMER Button
Used for timer setting in 30 minute units.
9 MODE A/B Button
Used to set A Mode or B Mode when specifying the operation time.
ABCDEFG
123457 9
Applied Service Ref. PLH-P1.6 / 2 / 2.5KAH1.UK
To Next Page
Loading...
