5 - 42
5.2 High Performance Model QCPU, Process CPU, Redundant CPU, Universal Model QCPU
5.2.7 Writing data to standard ROM and Flash card using GX Developer
5
MEMORIES AND FILES USED IN CPU MODULE
(4) Precautions
(a) Setting the communication time check period ( "Check at communication
time" ) in GX Developer
Since long processing time is required for writing files to the standard ROM or
Flash card, set the GX Developer's check at communication time to 60 seconds or
more. If the time for the check at communication time is too short, GX Developer
may time out.
(b) Writing files from GX Developer on another station via CC-Link
Since long processing time is required for writing files to the standard ROM or
Flash card, set the CPU monitoring time setting (SW000A) of CC-Link to 60
seconds or more.
(The default value of 90 seconds can be used.)
Remark
Refer to the following manual for details on the communication time check period
( "Check at communication time" ) setting and the CPU monitoring time
( "Watchdog time" ) setting.
GX Developer Version 8 Operating Manual
Figure 5.30 Check at communication time
Figure 5.31 Writing files from GX Developer on another station (via CC-Link)
GX Developer of other station
CPU module where file is
written to standard ROM
To Next Page
Loading...
Need help?
General
