Mitsubishi QJ72LP25-25 User Manual

A
-6
About Manuals
The following manuals are also related to this product.
In necessary, order them by quoting the details in the tables below.
Related Manuals
Manual name
Manual No.
(Model code)
Q corresponding MELSECNET/H Network System
Reference Manual (Remote I/O network)
SH-080124
(13JF96)
Q corresponding MELSECNET/H Network System
Reference Manual (PLC to PLC network)
SH-080049
(13JF92)
Compliance with the EMC and Low Voltage Directives
(1) For programmable controller system
To configure a system meeting the requirements of the EMC and Low
Voltage Directives when incorporating the Mitsubishi programmable
controller (EMC and Low Voltage Directives compliant) into other
machinery or equipment, refer to Chapter 9 "EMC AND LOW VOLTAGE
DIRECTIVES" of the QCPU User's Manual (Hardware Design,
Maintenance and Inspection).
The CE mark, indicating compliance with the EMC and Low Voltage
Directives, is printed on the rating plate of the programmable controller.
(2) For the product
For the compliance of this product with the EMC and Low Voltage
Directives, refer to Section 9.1.3 "Cables" in Chapter 9 "EMC AND LOW
VOLTAGE DIRECTIVES" of the QCPU User's Manual (Hardware Design,
Maintenance and Inspection).

Mitsubishi QJ72LP25-25 Specifications

General

Brand	Mitsubishi
Model	QJ72LP25-25
Category	Control Unit
Language	English