Mitsubishi S16R2-PTAW User Manual

11-9
Chapter 11 TROUBLESHOOTING
Overheating
Note: The table above also includes the parts not supplied by Mitsubishi Heavy Industries, Ltd. For the parts not sup-
plied by Mitsubishi Heavy Industries, Ltd., inspect and maintain them by following the manufacturer's operation
manual.
Table 11-8 Overheating
Causes Remedies
Cooling
system
Low coolant level
Check coolant leakage
Check Coolant Level. (Refer to P3-13).
Faulty water pump operation Consult a dealer of Mitsubishi Heavy Industries, Ltd.
Faulty thermostat operation Consult a dealer of Mitsubishi Heavy Industries, Ltd.
Faulty radiator operation Clean and inspect the radiator and radiator.
Control
system
Increase in load
Check fuel injection pump rack stroke.
Check control system and governor controller.
Consult a dealer of Mitsubishi Heavy Industries, Ltd.
Engine body Rapid wear of sliding parts Consult a dealer of Mitsubishi Heavy Industries, Ltd.

Mitsubishi S16R2-PTAW Specifications

General

Engine Model	S16R2-PTAW
Number of Cylinders	16
Cylinder Arrangement	V-type
Bore x Stroke	170 mm x 180 mm
Aspiration	Turbocharged and aftercooled
Starting System	Electric motor
Engine Type	4-cycle, water-cooled
Fuel System	Electronic control, common rail
Lubrication System	Forced lubrication
Cooling System	Water-cooled