'09•SRK-DB-087D
(6)ޓFlap and louver control
(a) Flap
(b) Louver
(c) Swing
(ii)
(c) Memory flap (Flap or Louver stopped)
(d) When not operating
COOL , DRY, FAN
Remote controller
display
HEAT
Approx. 5°
Approx. 25°
Approx. 25°
Approx. 40°
Approx. 35°
Approx. 50° Approx. 80°
Approx. 55°
Approx. 60°
Approx. 80°
Angle of Flap from Horizontal
Center installation
Remote controller
display
Angle of Louver
Left Approx. 50° Left Approx. 20°
Center
Right Approx. 20° Right Approx. 50°
In HEAT operation In COOL, DRY, FAN operation
Approx. 35°
Approx. 80°
Approx.
5°
Approx. 60°
(Swing)
(Flap stopped)
(Louver stopped)
(Swing)
(i)
'09•SRK-DB-087D
(9) 3D auto operation
(a) During Cooliong and Heating (Including auto cooling and heating)
(i)
(ii)
Cooling
Air flow selection
Operation mode
AUTO
Heating
Indoor temp. – Setting temp. >5°C
Indoor temp. – Setting temp.
5°C
Setting temp. – Indoor temp. >5°C Setting temp. – Indoor temp.
5°C
HIGH POWER AUTO
HI
HI
MED
MED
ULO
ULO
LO
LO
HIGH POWER AUTO
<
=
<
=
Flap
Louver
Cooling
Up/down swing
Heating
Wide (Fixed) Center (Fixed)
Flap
Louver
Cooling Heating
Left/right swing
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Flap
Louver
Cooling
Up/down swing
Heating
Center (Fixed)
Wide (Fixed)
Flap
Louver
Cooling Heating
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Operation mode
Indoor temp. – Setting temp. 2°C
Setting temp. – Indoor temp. 2°C
Heating
Cooling
Air flow direction contorol
2°C < Setting temp.
– Indoor
temp. 5°C
2°C <
Indoor
temp.
–
Setting temp. 5°C
Indoor temp. – Setting temp. > 5°C
Setting temp. – Indoor temp. > 5°C
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
<
=
<
=
<
=
<
=
Wide (Fixed)
Flap
Louver
Horizontal blowing (Fixed)
1)
2)
3)
4)
5)
3
4
(b) During DRY Operation (including auto DRY operation)
To Next Page
Loading...
Need help?
General
