Mitutoyo ID-C X series User Manual

OFF
OFF
ON
OFF
ON
SET
SET
MODE
MODE
SET
SET
SET
SET
MODE
MODE
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
SET
SET
Measurement mode
P
Reverse direction
ID-C X series Quick Reference Manual
Setting tolerance
judgment function
Changing resolution
Setting calculation function
Setting function lock
Press（within 2 sec.）
Press and hold
(2sec. or more)
inch ： 0.00005
0.0001，0.0005
mm ： 0.001，0.01
OFF
ON
OFF
ON
Setting preset value
（ABS mode）
ABS mode ⇔ INC mode
（Preset ） （Zero-setting）
SET
・Power On
・Holding displayed value or
External output of displayed value
Power Off
DATA ON・OFF
Function lock. The content of the
operation has been limited.
Reverse counting
Calculation function display.
Displayed value= Calculation coefficient
× Spindle displacement
◇Meaning of the icons
※
※0.001mm，.00005model only
To calculation
Coefficient
setting
Selection
sign
next digit
Repeat the above
procedures until
all digits
Complete setting
◎Please see the User’s manual for details.
No.99MAH028B
Selection
Selection
Selection
Selection
Selection
◇Key pressing method
ON
(Normal)
ON
(Enlarged)
No
change
Setting tolerance
Setting preset value
(Refer to the
user’s manual)
Quit setting mode
Upper limit value setting
Changing
Tolerance
limit value
The setting method is the same as the
Upper limit value setting.
Lower limit
value setting
Zero-setting
（INC mode）
・To cancel the setting halfway, press and hold
the MODE key in area . It returns to the state
in front of one. It can return to measurement mode
by repeating the same operation.
・Clears all settings when the battery is put in again.
Forward direction
Switching counting
direction
No
change
Changing
preset value
Selection
value
next digit
in ⇔ mm
（in/mm model only)
Parameter Setting Mode

Mitutoyo ID-C X series Specifications

General

Resolution	0.001 mm / 0.00005 inch
Power Supply	1 SR44 battery
Display	LCD
Operating Temperature	0 to 40 °C
Storage Temperature	-10 to 60 °C

Summary

Device Operation Basics

Key Pressing Methods

Defines button press durations (short press vs. press and hold) for device functions.

Data On/Off and Output

Explains how to turn the device power on/off and manage external data output.

ABS and INC Mode Selection

Describes switching between Absolute (Preset) and Incremental (Zero-setting) modes.

Parameter Setting Functions

Switching Counting Direction

Procedure to set the counting direction to forward or reverse.

Setting Tolerance Judgment

Configures tolerance limits for measurement judgment (ON/OFF, Normal/Enlarged display).

Changing Resolution

Allows selection of display resolution options for inch and mm units.

Setting Calculation Function

Enables or disables the calculation function, linking it to coefficient settings.

Setting Function Lock

Activates or deactivates the function lock to limit operations.

Icon Meanings

Understanding Symbols

Provides explanations for key icons used in the manual, such as reverse counting or function lock.