No. 99MAF029B
viii
Contents
CONVENTIONS USED IN THIS MANUAL ………………………………………………… i
Safety Precautions …………………………………………………………………………… ii
Precautions for Use …………………………………………………………………………… iii
Electromagnetic Compatibility (EMC) …………………………………………………… iv
Export Control Compliance ………………………………………………………………… iv
Notes on Export to EU Member Countries ……………………………………………… iv
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems) ………… iv
China RoHS Compliance Information ……………………………………………………… v
Warranty ………………………………………………………………………………………… vi
Disclaimer ……………………………………………………………………………………… vi
About This Document …………………………………………………………………………vii
1 Before Using This Product …………………………………………………………… 1
1.1 Product Capabilities ………………………………………………………………… 1
1.2 Part Names and Functions ………………………………………………………… 2
1.2.1 Main Unit……………………………………………………………………………………… 2
1.2.2 Display Unit ………………………………………………………………………………… 4
1.3 Basic Operations …………………………………………………………………… 7
1.3.1 Turning On the Power ……………………………………………………………………… 7
1.3.2 Moving the Probe …………………………………………………………………………… 7
1.3.3 Moving the Main Unit ……………………………………………………………………… 8
1.4 Preparing Measurements …………………………………………………………10
1.4.1 Origin Setup …………………………………………………………………………………10
1.4.2 Setting the Probe Diameter …………………………………………………………………14
2 Basic Measuring Methods ………………………………………………………………17
2.1 Measuring the Height ………………………………………………………………17
2.2 Measuring the Width ………………………………………………………………19
2.3 Measuring the Inner Diameter ……………………………………………………21
2.4 Measuring the Outer Diameter ……………………………………………………25
2.5 Measuring the Plane Displacement (Plane Scanning Measurement) …………29
3 Specific Usage Applications ……………………………………………………………31
3.1 Calculating the Difference Between 2 Measurements …………………………31
3.1.1 Determining the Difference Between the Most Recently Measured Value ……………32
To Next Page
Loading...
