Vacation mode
Vacation mode will stop your tank heating when you are away, and any
schedule currently set will be ignored until your return day.
To enter vacation dates, click the aeroplane icon on the tool bar.
If you do not set a schedule yourself, your tank will automatically run on a
‘default schedule’ until you do. This setting will heat your tank to 100% every
day at 3am. This may be useful to begin with if you are unsure of how much hot
water your household requires, but please note that this may not be the most
ecient setting to optimise on energy/cost!
Please note, the minimum hot water level your tank can heat to will be approx.
~40% for indirect tanks and 20% for direct tanks (this will be slightly dierent
depending on tank size). After this initial heat, you will be able to heat in 1%
increments.
14
To Next Page
