To Next PageTo Next Page
Need help?Do you have a question about the Mizerak P1240LEG and is the answer not in the manual?
General| Brand | Mizerak |
|---|---|
| Model | P1240LEG |
| Category | Indoor Furnishing |
| Language | English |
Details the Essex and Entertainer 8ft. Drop Pocket Pool Table models.
Lists specific model numbers for the pool table series.
Details the three containers and their contents for the pool table.
Contact information for Escalade Sports customer service and support.
Informs users that manual drawings may be exaggerated for detail.
Lists tools that are necessary but not included with the pool table.
Instructions for attaching wooden leg panels to leg facades.
Steps for attaching leg posts to the assembled leg facades.
Connects wooden beams to the leg assemblies using bolts and nuts.
Positions the short and long slats across the table beams.
Inserts dowel connectors into beams and starts screws.
Ensures frame is square and tightens screws holding slats to beams.
Instructions for leveling the assembled pool table frame.
Guides on finding the highest corner and using shims to level.
Guides on placing, marking, drilling, and securing table top sections.
Instructions for fitting and securing the end sections of the playing surface.
Cutting holes in the cloth for rail bolts using a sharp knife.
Explains how to identify left, right, and end rails based on their markings.
Attaches the identified rails to the playing surface using bolts and brackets.
Steps to straighten, align, and tighten side rails for proper fit.
Guides on squaring end rails and tightening bolts, excluding apron brackets.
Guides on fitting end aprons into rails and attaching corner posts.
Steps for sliding side aprons into place and securing them to corner posts and brackets.
Secures corner and side caps to the pocket edges using screws.
Inserts sight plugs into the predrilled holes in the rails.
Attaches corner drop pockets to the table using nails.
Trims and installs side drop pockets using nails.
Positions the playfield spots on the table surface.
Re-checks table levelness after a day and adjusts with shims if needed.
Details on how to pry open the crate and slide out the slate.
Cautionary advice for handling Slatron pieces and sanding fuzz.
General principles and tips for effective table shimming.
Sequential instructions for leveling the table using shims.
Checking levelness, placing shims, and tightening screws for a flat playing surface.
Steps for cleaning, applying, and sanding grout for seams and holes.
Steps for applying adhesive to one end and smoothing the cloth.
Applying adhesive to a side and smoothing the cloth.
Applying adhesive to remaining sides and stretching cloth to remove wrinkles.
Guides on cutting cloth into pie shapes and adhering it under pocket openings.
Outlines what the warranty covers, exclusions, and how to get service.
Specifies warranty terms for the playing surface material.
Covers warranty disclaimers, limitations, and consumer legal rights.
Visual identification of screws and nails with part numbers and quantities.
Visual identification of washers with part numbers and quantities.
Visual identification of locknuts with part numbers and quantities.
Visual identification of other necessary hardware components.
