MJX F46 - Spinning trim adjustment; Operating the helicopter; Ascending and descending

9
STICK MOD 1 or 2:
STICK MOD 3 or 4:
If the helicopter keeps spinning even there is no control signal given,
users may adjust the rudder trim to keep the helicopter balanced.
If the helicopter keeps spinning
clockwise in the air,turn right of
Trimmer B until it gains balance.
If the helicopter keeps spinning
counter-clockwise in the air,turn
left of Trimmer B until it gains
balance.
If the helicopter keeps spinning
clockwise in the air,turn right of
Trimmer C until it gains balance.
If the helicopter keeps moving
righttward, turn left of Trimmer C
until it gains balance.
Operating
Upward
Push up the throttle control stick, the
rotation speed of the mains rotors are
increasing and the helicopter ascends
accordingly.
Downward
Push down the throttle control stick,
the rotation speed of the mains rotors
are decreasing and the helicopter
descends accordingly.
PUSH
EXIT/
LIGHT
MENU/
OK
PUSH
EXIT/
LIGHT
MENU/
OK
PUSH
EXIT/
LIGHT
MENU/
OK
PUSH
EXIT/
LIGHT
MENU/
OK
If the helicopter keeps spinning
counter-clockwise in the air,turn
left of Trimmer C until it gains
balance.
PUSH
EXIT/
LIGHT
MENU/
OK