MK Controls Lightning Bug Plus - User Manual

Guide for attaching the device to a camera hotshoe and connecting the shutter cable.

Overview of the three buttons used to operate all features of the Lightning Bug Plus™.

Explanation of how to select between Standard and Fireworks operating modes during startup.

Pressing this button reduces the sensitivity level, indicated by orange LEDs on the bargraph.

Pressing this button increases the sensitivity level, indicated by orange LEDs on the bargraph.

How orange LEDs display current sensitivity and yellow LED indicates event detection.

Pressing this button decreases the time delay for shutter release in Fireworks Mode.

Pressing this button increases the time delay for shutter release in Fireworks Mode.

How orange LEDs display the current delay level in Fireworks Mode.

Allows incorporating a slight delay between sensing lightning and tripping the shutter.

Configures the camera's meter to activate only when the shutter is triggered.

Procedure to confirm the unit correctly triggers the camera shutter and check FPS rate.

Information on updating the device's internal firmware via a USB-C connector.

How the device monitors battery voltage and indicates low levels via an orange LED.

Recommendations for camera focus, live view, and mirror lockup settings for optimal capture.

Guidance on aperture priority, ISO, aperture, and filters for daytime lightning photography.

Details on the product's lifetime warranty against defects and transferability.

List of conditions and circumstances not covered by the limited warranty.

Information on obtaining product repair or replacement outside the warranty period.