Rev: Version 1.2 June 16th, 2022 Page 6 of 26
Lightning Bug Plus
TM
Features
- 26 Levels of sensitivity adjustment.
- Automatic or manual operation of the camera’s meter.
- Auto-meter Off feature to help preserve your camera battery during long sessions.
- Exclusive Fireworks delay mode – allows a delay between the initial detected burst,
and the actual shutter release. The delay can be adjusted from 0 to 2.25 seconds in
1/4 second increments.
- Attaches to your camera via an industry standard hotshoe mount. Cables are available
to fit a wide range of cameras.
- Three simple buttons control all of the features.
- Allows limiting of frames per second – can be adjusted from 1 to 10 FPS.
- Allows adjustment of post-trigger delay to improve capture percentage when using
with ‘fast’ or ‘zero lag-time’ cameras.
- Water resistant overlay with soft-touch controls protects the Lightning Bug Plus™
from inclement weather, and ensures that it won’t be accidentally turned on or off.
- Highly visible orange LED display shows at a glance the current configuration settings.
- Bright yellow LED flashes when the unit detects an event within its field of view.
- Allows testing of your camera connection.
- Retains user settings, even with battery removed.
- Power saving mode to prolong battery life.
- Battery can be removed or replaced without removing the Lightning Bug Plus
TM
from
your camera.
- Power On Self-Test (POST) insures that the unit is operational every time you turn it
on.
- Electrical isolation between the unit and your camera via MOSFET technology to
protect the camera’s electronics.
- Internal firmware is field-updateable via a standard USB-C connector (cable included
with the product).
To Next Page
Loading...