Rev: Version 1.2 June 16th, 2022 Page 13 of 26
Table 1: LED Bar graph Display:
Shown below, Level 1 is the LEAST sensitive, Level 26 is the MOST sensitive
setting.
It is possible to confused level 8 with level 19. If unsure, increase or decrease the
level to verify setting. When adjusting the settings, your camera may trip – this is
due to the system making internal changes on the fly. Your camera does not need
to be powered on when making adjustments.
Important – if while increasing adjustments the unit begins tripping non-stop,
reduce the sensitivity till this stops. The highest sensitivity settings generally are
only used for extremely dark environments with lightning a long distance from
your location.
To Next Page
Loading...