Rev: Version 1.2 June 16th, 2022 Page 22 of 26
5. When I press the LEFT and RIGHT buttons to test the system, nothing
happens
- Please verify that your camera to Lightning Bug Plus
TM
cable is fully
inserted, and inserted correctly, into your camera. Some cables, like
the Nikon DC2, can inadvertently be plugged in backwards.
6. There's lightning all around me, but the lightning bolt on the Lightning
Bug Plus™ never lights up
- Increase the sensitivity of the Lightning Bug Plus™ by pressing the
RIGHT arrow.
- Make sure that the Lightning Bug Plus™ is not behind a pane of glass
- most modern glass windows in cars and homes block infrared light,
which the Lightning Bug Plus™ needs to 'see' in order to function.
7. My camera keeps tripping the shutter whenever the Lightning Bug Plus™
is attached to it
- Decrease the sensitivity of the Lightning Bug Plus by pressing the
LEFT arrow.
8. I can't see my pictures on the camera back immediately after a shot is
taken
- Change the meter mode function in the Lightning Bug Plus™ to set
the meter to 'Always Off' - see the Operations section of this manual
for more details.
9. What do I do if none of these suggestions works?
- You can either contact us to discuss the issue, or you can return the
unit to us for service - see
http://www.mkcontrols.com/lightningbugplus/rma/ for instructions.
To Next Page
Loading...