Need help?Do you have a question about the MK Products Cobramatic Pro Series and is the answer not in the manual?
General| Weight | 26 lb |
|---|---|
| Wire Size | 0.030 - 0.045 in |
| Wire Speed | 50 - 700 inches per minute |
| Input Voltage | 115 VAC |
| Wire Feed Speed Range | 50 - 700 inches per minute |
| Wire Diameter Range | 0.030 - 0.045 in |
| Duty Cycle | 60% |
Importance of training and following safety rules for equipment use.
Covers burn, fume, fire, explosion, and compressed gas safety guidelines.
Details wire diameter, spool capacity, and power input requirements.
Covers input power, grounding, gas, coolant, and gun connections.
Guide to wire spool installation, drag settings, and threading.
Explains the feeder's general operational principles and components.
Overview of the feeder's controls and their functions.
Details the PosaStart feature for controlled wire run-in and operation.
Managing gas purge, wire inch, and meter functions.
Explains external control signals and measurements via TB1.
General guidelines for maintaining the wire feeder system.
Procedures for testing feeder circuits, speed control, and gun components.
A table of common symptoms, causes, and remedies.
Lists various exploded views and parts lists for system components.
Schematics and block diagrams of the main PC board and system interconnections.
Details terminal block TB1 configuration for external control.
Outlines the terms and conditions of the product warranty.
To Next Page