EasyManua.ls Logo

MK Sound MX250 - Service Information; System Set-Up Guide

MK Sound MX250
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
12. IF YOU NEED SERVICE
Contact your MK Sound dealer. Do not send your speaker to MK Sound directly without obtaining
prior authorization.
13. SYSTEM SET-UP GUIDE
The 5 Most Important Items in System Set-up:
1. Find the best location for the subwoofer for maximum output and flattest response
(possibly the corner closest to the listening position)
2. Aim the front speakers (and the surrounds, if possible) for the flattest response and
the best imaging
3. Set all speakers to the “Small” setting for proper High-Pass and Low-Pass Filter
operation to get the lowest distortion and maximum dynamic range
4. Calibrate all speakers and the subwoofer to the identical level for proper imaging
and balance
5. Make sure all speakers are in phase for proper imaging and impact
These instructions will help you make sure that you cover all steps in setting up a 5.1 multi-
channel or Pro-Logic surround system. In addition to following this list, make certain that you
study and understand the owner’s manual for each and every component used in the system,
especially the processor/receiver. Have fun and good luck!
A useful tool for system setup is the DVD called Video Essentials. If you don’t have one, you can
order it at www.videoessentials.com.

Related product manuals