MK ExLRT - Change Trigger Values; Change % of Reading

OPERATOR MANUAL EXLRT
Ref: XLR-104 © 2020 MK Test Systems Ltd Page 26 of 28
Change trigger values?
Toggle to to change the trigger settings then press the Select button to proceed
into the “Change Trigger Limits” screen
Toggle to to turn triggering off (default when entering this screen)
Change % of reading
To change the value, press the select button to enter the change value window.
Change the percentage value in steps of 1% using the up/down buttons. When finished, press the OK
button.
No Action
Increase
percentage
Select
Go back to
previous
menu
Decrease
percentage