MK MK-100 - Stand

17
MK-100 TILE SAW STAND
The MK-100 weighs ninety-six (96) pounds; follow the guidelines in the TRANSPORT
section when placing it on the stand (MK Diamond Part# 168244).
If using the Optional MK Diamond Stand, follow these steps.
FOLDING STAND
CAUTION
(A)
Open the stand and place on at
surface. Remove Water Basin
from saw.
(B)
Place saw on stand.
(C)
Ensure saw frame is
positioned properly.
(D)
Reinstall the Water Basin.
NOTE: