MKS 41A - Product Location and Requirements; Setup; Dimensions of the Single-Ended Units; Figure 1: Dimensions of High Pressure Single-Ended Units

Product Location and Requirements Cha
p
ter Two: Installation
8
Product Location and Requirements
•
Ambient Operating Temperature: 0° to 50
°
C (32° to 122
°
F)
•
Ventilation requirements include sufficient air circulation
•
Storage Temperature Range: -20° to +80
°
C (-4° to 176
°
F)
•
Input power: 10 to 20 VDC @ 35 mA maximum or 20 to 30 VDC @ 30 mA maximum
Setup
Dimensions of the Single-Ended Units
Note
All dimensions are listed in inches with millimeters referenced in
parentheses.
The dimensions of single-ended units depend upon the full scale range of the unit. High pressure
units have a full scale range of 50 psi through 500 psi (2600 Torr through 25000 Torr). Low
pressure units have a full scale range of 10 through 1200 Torr.
Hi
g
h Pressure Units
Ran
g
es 50 psi (2600 Torr) throu
g
h 500 psi
1.50 (38.1) DIA
2.20 (55.9)
0.19 (4.7)
0.31 (7.9)
0.63 (16.0)
4-VCR fittin
g
fixed male
0.32 (8.0)
0.62 (15.9)
Hex Flat
A
0.40 (10.2) for 1/8 NPT
0.58 (14.7) for 1/4/NPT
A =
Figure 1: Dimensions of High Pressure Single-Ended Units