Appendix B: Model Code Explanation Model Code
35
Trip Point Value (HHH)
The trip point value is designated by a three digit code. The trip point must be designated in the
same pressure units as the full scale range. For example, a 1000 Torr full scale unit with a trip
point of “760” indicates the standard atmospheric pressure of 760 Torr. For a 100 Torr unit, with
a 50 Torr trip point, enter “050.” For reverse calibration, list the trip point as a value below
atmosphere. Consult the factory if your trip point cannot be specified by three digits.
Trip Point Value Ordering Code
Three digit value (001 through 999)
exception
: 1000 Torr = 1KT 3 digit value
To Next Page
Loading...