Ⅱ
Features
1.Support 7 Languages Online switching.
2.Support Preview File Model and show model picture in print.
3.Use CORTEX-M4 main control chip, 168M frequency,3.5-inch display with higher
sharpness.
4.Use 3.5-inch TFT touch screen, simple operation interface, high sensitivity.
5.Support wifi,it can be controled by app or web.Mobile app supports Android, iOS
system,with two versions in Chinese and English.
6.Upgrade configuration firmware by sd card, simple and convenient operation.
7.Boot logo and all buttons and other interfaces can be designed by yourself;A
maximum of 13 directive functions can be customized.
8.Support multiple functions,such as Breakpoints recovery function,filament
detecting function,save the gcode data with power off function,auto off after print
finish function.
9.Support for Marlin firmware, Repetier firmware, Smoothieware firmware.
10.Gcode Print to support Chinese filename.
Ⅲ.Port Instructions
3.1 MKS TFT3.5 Front
To Next Page
Loading...
