Do you have a question about the MMM Group incucell 707 and is the answer not in the manual?
Covers initial setup, service modes, and parameter configurations for the unit.
Setting and checking the safety thermostat for over-temperature protection.
Configuring temperature deviation limits and error handling for temperature accuracy.
Setting up and running Program P1 for constant temperature operation.
Setting up and running Program P2 for temperature ramp and dwell time.
Setting up Program P3 with delayed start and temperature/time settings.
Setting up Program P4 with two temperature levels, ramps, and cycling.
Overview of Program P5, which consists of up to 40 segments with complex timing and temperature control.
Details Program P6, which uses real time and calendar date for complex scheduling.
Explains various error codes displayed by the unit and their meanings.
Details on sterilization programmes SS and SP for Venticell.
Step-by-step instructions for manually opening the door in an emergency.
| Category | Laboratory Equipment |
|---|---|
| Model | incucell 707 |
| Manufacturer | MMM Group |
| Type | Incubator |
| Volume | 707 liters |
| Interior Material | Stainless steel |

Loading...