Need help?Do you have a question about the MMM Group CO2Cell 190 Standard and is the answer not in the manual?
Details legal aspects and user responsibilities regarding the manual and incubator.
Specifies the approved applications for MMM CO2 Cell Standard incubators.
Explains the meaning of various safety and information symbols used throughout the document.
Provides essential safety precautions for qualified laboratory personnel operating the incubator.
Describes the materials and build of the incubator, including inner chamber and housing.
Details the outer and inner doors, their heating, sealing, and interlocks.
Explains the digital controller and PID loops for temperature and CO2 management.
Describes the infra-red sensor technology and its placement for CO2 measurement.
Illustrates front and inner views of the incubator with key components labeled.
Details the ports and connectors located on the rear of the incubator.
Instructions for inspecting packaging and removing the incubator and accessories.
Safety advice and procedures for safely lifting and transporting the incubator.
Advice on acclimatizing the incubator after storage in cold conditions.
Guidance on selecting a suitable site and optimal ambient conditions for incubator placement.
Details on shelf configuration, spacing, and usable internal dimensions.
Instructions for placing and filling the water tray to achieve 90% rH.
Steps for connecting the CO2 gas supply, including pressure regulation.
Guidelines for connecting the incubator to the mains electrical supply.
Instructions for powering on the incubator and initial display readings.
Lists default settings for temperature, CO2, and alarms for immediate use.
Explanation of the main digital display elements and alarm indicators.
Diagram illustrating navigation and button functions within the control interface.
Procedure for adjusting the incubator's target temperature.
Procedure for adjusting the incubator's target CO2 concentration.
Overview of how temperature alarms function and are triggered.
Procedure for adjusting the upper limit for temperature alarms.
Procedure for adjusting the lower limit for temperature alarms.
Explanation of CO2 alarm functionality and relative limit adjustments.
Procedure for adjusting the upper limit for CO2 alarms.
Procedure for adjusting the lower limit for CO2 alarms.
Details the function of the door open alarm system.
Procedure for adjusting the delay timer for the door open alarm.
Describes the three phases of the high temperature decontamination process.
Steps required before initiating the high temperature decontamination cycle.
Step-by-step guide to initiating the 160°C decontamination process.
Explains factors affecting cycle duration and recommends optimal timing.
Describes the natural cooling process after the high temperature dwell.
Details the standard BMS alarm relay connection for monitoring.
Describes the benefits and retrofitting of a multi-door system for improved recovery.
Lists optional accessories that can enhance incubator functionality.
Instructions for safely cleaning the exterior of the incubator.
Guidance on cleaning the interior chamber and its components.
Notes on natural oxidation occurring on stainless steel during high-temp cycles.
Details the standard two-year manufacturer's warranty and registration.
Recommendations for annual calibration and maintenance contracts.
Procedures and required information for returning the incubator for repair.
Instructions for proper disposal of the incubator by licensed companies.
Presents detailed specifications for temperature, CO2, humidity, and electrical parameters.
Provides external and internal dimensions of the incubator.
General| Brand | MMM Group |
|---|---|
| Model | CO2Cell 190 Standard |
| Category | Laboratory Equipment |
| Language | English |
To Next Page