MMM Group ecocell 22 User Manual

Instructions for use
Laboratory drying ovens and incubators
line Comfort
LSI_K_np_en 1206_mmm_V2.08_B2V
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 222/2, 404,
404/2, 707, 707/2
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 404, 707
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707
Návod na servis
Laboratorní sušárny a inkubátory - linie
Standard
LSI-S_ns_cz_0801_V2.01_B2V
Návod k použití
Laboratorní sušárny a inkubátory
linie Komfort
LSI_K_np_cz 0608_V1.14
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 404, 707
STERICELL 22, 55, 111, 222, 404
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707

MMM Group ecocell 22 Specifications

General

Brand	MMM Group
Model	ecocell 22
Category	Laboratory Equipment
Language	English

Summary

GENERAL INFORMATION

PURPOSE AND USE

Defines the intended application and use of the laboratory ovens.

IMPORTANT INSTRUCTIONS

UNPACKING, CHECKING AND TRANSPORT

Procedures for receiving and inspecting the oven upon delivery.

PRE INSTALLATION

Guidelines for setting up the oven in its operating environment.

USEFUL SPACE

Details on the usable internal dimensions and their impact on performance.

DESCRIPTION OF THE OVEN

GENERAL VIEW

Overview of the oven's components and external features.

OVEN DESCRIPTION DETAILS

POWER CONNECTION AND CONNECTORS

Information on electrical requirements and available ports for connectivity.

CONTROL PANEL

Explanation of the user interface, buttons, and display indicators.

FUNCTION AND OPERATING

BASIC SETTING OF THE UNITS

Initial configuration and service mode access for unit setup and calibration.

STORING AND RESTORING PROGRAMS

Managing programs using chip cards for saving and loading data.

FUNCTION AND OPERATING - SERVICES

SET REAL TIME AND DATE

Procedure to set the internal clock and date for accurate timing.

SERVICE 06 SETTINGS

Setting switching times for inner socket and fan run after program termination.

FUNCTION AND OPERATING - SAFETY

SAFETY THERMOSTAT SETTING

Configuring the safety thermostat to prevent overheating and protect samples.

TEMPERATURE TOLERANCE SETTING

Defining acceptable temperature deviations and error handling.

FUNCTION AND OPERATING - DOOR & PROGRAMS

DOOR BLOCKING FUNCTION

Managing the automatic or manual blocking of the oven door.

PROGRAM P1 SETTING

Step-by-step guide to set up Program P1 for constant temperature operation.

FUNCTION AND OPERATING - PROGRAMS P2/P3

PROGRAM P2 SETTING

Setting up Program P2 for reaching a temperature and holding it for a duration.

PROGRAM P3 SETTING

Configuring Program P3 with a delayed start and temperature hold.

FUNCTION AND OPERATING - PROGRAM P4

PROGRAM P4 SETTING

Setting up Program P4 with two temperature levels, ramps, and cycling.

FUNCTION AND OPERATING - ERRORS

PROGRAM P6 SETTING AND CONTROL

Detailed explanation of Program P6, driven by real time and calendar date.

ERROR MESSAGES

List and explanation of error codes displayed on the unit and troubleshooting guidance.

FUNCTION AND OPERATING - UTILITY

PRINTING THE PROTOCOL

How to connect and use a printer to record operational data.

AIR FLAP ADJUSTMENT AND FUNCTION

How to adjust and use the air flap for ventilation and drying.

WARRANTY AND SERVICE

TRANSPORT AND STORAGE

LIQUIDATION OF UNIT

OPTIONAL EQUIPMENT

DOOR WITH WINDOW AND INNER LIGHTING

Description of the optional door with glass and internal lighting.

OPTIONAL EQUIPMENT - PC & FILTERS

SUPPORTIVE SW FOR PC

Software for recording and analyzing oven data on a PC.

HEPA FILTER

Information on the HEPA filter, its installation, and function.

OPTIONAL EQUIPMENT - DOOR FUNCTIONS

DEVICES WITH THE DOOR BLOCKING FUNCTION

Explanation of the door blocking mechanism and its modes.

STERILIZATION FUNCTIONS

VENTICELL WITH STERILIZATION FUNCTION

How Venticell models offer specialized sterilization programs.

BASIC STERILIZATION PROGRAMME SS

Details on the SS program for basic sterilization, including setting and course.

STERILIZATION FUNCTIONS - SP PROGRAM

STERILIZATION PROGRAMME SP WITH PREHEATING PHASE

Information on the SP program with a preheating phase for sterilization.

EMERGENCY DOOR OPENING

EC-DECLARATION OF CONFORMITY