MMM Group ecocell 55 - User Manual

Instructions for use
Laboratory drying ovens and incubators
line Comfort
LSI_K_np_en 1206_mmm_V2.08_B2V
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 222/2, 404,
404/2, 707, 707/2
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 404, 707
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707
Návod na servis
Laboratorní sušárny a inkubátory - linie
Standard
LSI-S_ns_cz_0801_V2.01_B2V
Návod k použití
Laboratorní sušárny a inkubátory
linie Komfort
LSI_K_np_cz 0608_V1.14
ECOCELL 22, 55, 111, 222, 404, 707
DUROCELL 22, 55, 111, 222
VENTICELL 22, 55, 111, 222, 404, 707
STERICELL 22, 55, 111, 222, 404
INCUCELL 22, 55, 111, 222, 404, 707
INCUCELL V 22, 55, 111, 222, 404, 707

Summary

General Oven Information

Important Instructions for Use

Unpacking, Checking, and Transport

Procedures for receiving and checking the oven and its accessories for completeness and damage.

Pre-Installation Guidelines

Guidelines for indoor operation, electrical connection, and initial heating to ensure proper function.

Oven Description and Components

Power Connection and Connectors

Details on connecting the unit to power supply and available connectors, including RS-232 interface.

Control Panel Overview

Describes the functions of the control panel keys, display, and indicators for operating the unit.

Function and Operating Procedures

Basic Setting of the Units

Explains the fundamental inputs and service mode required to activate thermal technology units with Comfort regulator.

Safety Thermostat Setting

Details on setting and checking the safety thermostat to prevent over-temperature damage.

Temperature Tolerance Settings

Explains temperature deviation settings and error codes related to exceeding preset limits.

Program P4 Operation

Describes the P4 program for operating at two temperature levels with controlled speed (ramps) and cycling.

Program P6 Operation

Details the P6 program, which uses real time and calendar date for segment duration and allows for program shifting.

P6 Programme Setting Examples

Error Messages and Meanings

Lists common error codes displayed by the unit and their meanings, suggesting service calls.

Unit Parameters and Specifications

Electric Connections Data

Provides essential electrical data, connection types, voltage, and safety requirements for installation.

Cleaning and Decontamination

Unit Cleaning and Decontamination

Guidelines for safely cleaning the interior and exterior of the unit using appropriate methods and materials.

Warranty, Transport, and Storage

Warranty and Service Conditions

Outlines the warranty terms, conditions, and limitations, including requirements for authorized repairs.

Model-Specific Installation Data

Venticell 222;2 Installation Data

Provides specific installation data, power input, electrical connection, and weight for the Venticell 222/2 model.

IC and ICV Decontaminating Function

Venticell Sterilization Function

Explains that P3 and P4 are replaced by sterilization programs SS and SP for Venticell units.

Basic Sterilization Programme SS

SP Sterilization Programme with Preheating

Emergency Door Opening Procedure

EC Declaration of Conformity

MMM Group ecocell 55 Specifications

General

Category	Laboratory Equipment
Model	ecocell 55
Manufacturer	MMM Group
Type	Incubator
Nominal Volume	55 liters
Power Supply	230 V, 50/60 Hz
Number of Shelves	2