Mobatime DC Series User Manual

© MOBATIME BE-800693.16
INSTRUCTION MANUAL
State-of-the-art technology digital clock
DC series

Mobatime DC Series Specifications

General

Category	Clock
Synchronization	DCF77, GPS, NTP
Display Technology	LED
Outputs	Ethernet
Communication	SNMP
Dimensions	Varies by model

Summary

Description of MOBATIME Digital Clocks

Basic Properties and Features

Details on digit height, colors, light intensity, front cover, design options, depth, frame, and setting methods.

Clock Assembly and Installation

Single-Sided Clock Assembly

Instructions for mounting the single-sided clock to the wall, including cable connections and frame securing.

Double-Sided Clock Assembly

Instructions for mounting the double-sided clock, including suspension, cable connections, and frame securing.

Connecting the Terminal Block

Control PCB Overview

Function of Plug Connectors

Cable End Connections

Clock Control via Keyboard

Setting Time and Date

Step-by-step guide to setting the current time and calendar date via the clock's pushbuttons.

Menu for Clock Parameter Settings

Navigating the clock's menu system to adjust various operational parameters.

Clock Control via IR Remote Control

Setting Time and Date with IR Remote

Procedure for setting the time and date using the IR remote control interface.

Clock Parameter Settings via IR Menu

Accessing and configuring clock parameters through the IR remote control menu.

Clock Menu Table

Stopwatch Control via Keyboard

Stopwatch Menu Navigation

Accessing and navigating the stopwatch functions via the keyboard menu.

Setting Initial Countdown Time

Configuring the starting time for the stopwatch's countdown mode.

Stopwatch Control via IR Remote

Stopwatch Menu via IR Remote

Navigating the stopwatch menu and functions using the IR remote control.

Setting Initial Countdown Time with IR

Stopwatch Menu Table

Local Time Calculation Methods

Basic Setting: Control by Synchronization Source

Non-Network Clock Operation Modes

Autonomous Clock Synchronized by DCF 77 Receiver

Autonomous Clock Synchronized by GPS Receiver

Slave Clock Controlled by Synchronizing Impulses

Slave Clock Controlled by MOBATIME Serial Code, MOBALine, or IRIG-B

Slave Clock Controlled by IF482 over RS232 or RS485

Slave Clock Controlled by Supervised RS485

Synchronization in WTD System

NTP and PoE Clock Operation

Unicast Mode Operation

Synchronizing the clock via NTP server using unicast mode and configuring network parameters.

Multicast Mode Operation

WiFi Clock Operation

Setting via Default MOBA-WIFI Network

Connecting the clock to the default MOBA-WIFI wireless network.

Setting via AP Mode

Configuring network parameters by setting the clock to Access Point (AP) mode.

Setting Network Parameters Using Telnet

Testing Mode and Parameter Reset

Synchronization Test Procedure

Parameter Reset Procedure

Firmware Update Procedures

Firmware Update via RS232

Firmware Update via Ethernet (NTP/PoE)