Need help?Do you have a question about the Mobatime DC.57.4 and is the answer not in the manual?
Details single-sided clock mounting steps from frame fixation to snapping.
Details double-sided clock installation, connecting parts and securing to springs.
Illustrates the control PCB, numbering, and functions of connectors and jumpers.
Lists the functions and purposes of various plug connectors (JP1 to JP21).
Illustrates wiring for LINES, TEMP, CTRL, RS-232, RS-485, and RELAY connections.
Explains key stroke abbreviations and pushbutton functions in Clock mode.
Details the procedure for setting the year, day, month, hours, and minutes.
Guides entry into the parameter setup menu and lists options from the menu table.
Submenu for setting time constants for display of time, date, temperature, and stopwatch.
Configuration for multicast support, SNMP, and Telnet services.
Using SET, OK, CLR buttons for time and date adjustments via IR remote.
Accessing clock parameters using MENU, >>, <<, and SET buttons via IR.
Synchronizing the clock to UTC from an NTP server in unicast mode.
Synchronizing the clock to UTC from an NTP server using multicast mode.
Setting up the clock to connect to the default MOBA-WIFI network.
Configuring the clock to act as an Access Point (AP) for network connection.
Configuring WiFi network parameters by connecting to the clock via telnet.
Procedure for updating firmware using RS232 connection and Flash Magic software.
Procedure for updating firmware over Ethernet using TFTP server.
General| Power Supply | 24 VDC |
|---|---|
| Category | Clock |
| Synchronization | DCF77 |
| Inputs | Impulses |
| Storage Temperature | -20°C to +60°C |
To Next Page
