© MOBATIME 42 / 52 800693.16
12.2.2 WiFi 2.4/5 GHz variant
• set value 3 in item P26 in the main MENU
• connect your computer to the MOBAxxxxxx wireless network with the following
parameters:
Net name (SSID): MOBAxxxxxx
(where xxxxxx represents certain octets WiFi clock’s
MAC address)
Used coding: WPA2
Coding key: passwort
DHCPv4: allowed
Clock’s IP address: 192.168.2.1
• connect clock using telnet, see chap. 12.3.
12.3 Setting the network parameters using telnet
• connnect clock via windows command <IP adresa>
e.g. telnet 192.168.2.1
• the request for the password appears (initial password is 718084)
• the software and hardware version displays if password entering was successful
• inserted commands can be sent off using Enter key, the Backspace key serves for
correction of the typing errors
• command help or ? displays help with command’s list
• command reset resets the clock (setting modifications are written to data flash)
• command conf –p displays the current setting of the menu parameters
• command conf –n displays the current network parameters, MAC address and
wireless network parameters
• command conf –? displays help for the command conf parameters
• command wifi-n displays the wireless network setting
• command wifi-? displays helpfor wifi parameters
• it is necessary to end telnet by command exit
To Next Page
Loading...
