Mobatime DC.57.4 - Page 43

© MOBATIME 43 / 52 800693.16
Example of setting network parameters using telnet – WPA and DHPCv4
(valid only for WiFi 2.4 / 5 GHz):
• command wifi –s mobatime set network name (SSID) of new wireless network
• command wifi –w 7 set version of used coding on PEAP
• command wifi–u eapuser set user name for EAP authentication to “eapuser”
• command wifi –p abcdefg set password for EAP authentication
• command conf –u1 pool.ntp.org set IP address of NTP server on
“pool.ntp.org”. Both NTP name and IP address can be use.
• command conf –p19:03 set the clock for connecting to the new initiated wireless
network with DHCPv4 report
• command exit ends telnet and writes changes into Flash
Example of setting network parameters using telnet – WPA2 with static IP
• command wifi –s mobatime set network name (SSID) of new wireless network
• command wifi –w 4 set version of used coding on WPA2 for new wireless network
• command wifi –p abcdefg set encryption key for new wireless network
• command conf –u1 pool.ntp.org set IP address of NTP server on
“pool.ntp.org”. Both NTP name and IP address can be use.
• command conf –p19:02 set the clock for connecting to the new initiated wireless
with manually set network parameters
• command conf –i 192.168.0.254 set clock’s IP address to 192.168.0.254
• command conf –s 255.255.255.0 set clock’s subnet mask on 255.255.255.0
• command conf –g 192.168.0.254 set clock’s default gateway 192.168.0.254
• command exit ends telnet and writes changes into Flash