Mobatime DC Series - Description of MOBATIME Digital Clocks; Basic Properties and Features

© MOBATIME 5 / 52 800693.16
1 Description
General purpose digital clock, intended for indoor use • The clock meets the requirements of
the majority of conventional applications • 7-segment LED display of high luminance provide
for excellent readability from various angles of view • Eight combinations of the height and the
number of digits • Autonomous operation with internal quartz powered from mains • NTP
multicast or unicast synchronization in Ethernet or WiFi network powered over PoE or mains
powered • Slave clock operation in wireless WTD system based on a transmitter which sends
the time signal • Slave clock operation controlled by self-setting MOBALine code mains
powered • Slave clock operation controlled by built-in RS 232, RS 485 or IRIG-B interface,
mains powered • LED display in red, pure green, blue, amber or green • Single or double
sided clock • Clock frame made of anodized aluminum profiles • Wall mounting for single sided
clock • Ceiling suspension or wall bracket mounting for double as well as single sided clock
Basic properties
• digit height of 57, 100 or 180 mm, which corresponds to readability distance of approx. 25,
40 or 65 meters
• color of the digits: red, pure green, blue, yellow or green
• manual or automatic setting of the LED display light intensity
• anti-reflex front cover acrylic glass which prevents light reflex and improves the digit
readability
• single-sided or double-sided design, for wall mounting (for single-sided clock design,
only), or to be suspended on ceiling or fixed to a side kick up console
• depth of single-sided clock design only 39 mm (66 mm for the 180 mm versions) or 78
mm (130 mm) for the double-sided design)
• clock frame made of anodized aluminum profiles, in black or silver color. Any other RAL
tint or imitation of various materials (wood, marble…) on request
• clock setting carried out remotely or using two push-buttons, the latter installed at the
upper part of the frame
• autonomous, quartz controlled time base with the possibility of synchronization using the
following: DCF 77 radio signal, 24 V minute impulses, the MOBATIME serial code,
MOBALine, RS 232, RS 485, IRIG-B or GPS
• IPv4 and IPv6 support
• NTP multicast or unicast synchronization in Ethernet or unicast synchronization in WiFi
network powered over PoE or mains powered
• configuration / supervision by means of MOBA-NMS software or SNMP protocol
• slave clock operation in wireless WTD system (868MHz) based on a transmitter which
broadcasts the time signal
• possibility to set up the world time zones with indication of the time shift (DST) for the
particular time zone. Control over the DCF receiver or the master clock