MCF32, MCF40, MCF60, FR40 AC/DC Operation
15
6.5 Using the cooling device
A
1. Place the cooling device on a firm foundation.
2. Connect the cooling device, see chapter “Connecting the cooling device”
on page 13.
A
3. Press the “ON/OFF” button for between one and two seconds.
✔ The “POWER” LED lights up.
✔ The display switches on and shows the current cooling temperature.
I
✔ The cooling device starts cooling the interior.
I
To avoid food waste, note the following:
Keep temperature fluctuation as low as possible. Only open the cooling
device as often and for as long as necessary. Store the foodstuff in such a
way that the air can still circulate well.
Adjust the temperature to the quantity and type of the foodstuff.
Foodstuff can easily absorb or release odor or taste. Always store food-
stuff covered or in closed containers/bottles.
NOTICE! Damage hazard
Place the cooling device as shown (fig. 1, page 3). If you operate
the cooling device in a different position it can be damaged.
NOTICE! Hazard from excessively low temperature
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “POWER” flashes
orange.
To Next Page
Loading...
Need help?
General
