Operation MCF32, MCF40, MCF60, FR40 AC/DC
16
6.6 Latching the cooling device lid
1. Lift the latch (fig. 1 1, page 3) and close the lid.
2. Release the latch.
✔ The latch audibly clicks in place and secures the cooling device lid.
6.7 Setting the temperature
1. Press the “SET” button once.
2. Use the “+” and “–” buttons to select the cooling temperature.
✔ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is
displayed again.
6.8 Switching off the cooling device
1. Empty the cooling device.
2. Switch the cooling device off.
3. Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
To Next Page
Loading...
