MCF32, MCF40, MCF60, FR40 AC/DC Operation
17
6.9 Using the interior light (only MCF60)
1. Ensure the display shows the actual temperature.
2. Press the “–” button to switch the interior light on.
3. Press the “–” button again to switch the interior light off.
✔ The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
6.10 Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
A
To defrost the cooling device, proceed as follows:
1. Take out the contents of the cooling device.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the cooling device.
4. Leave the lid open.
5. Wipe off the defrosted water.
6.11 Replacing the fuse
➤ Replace the fuse (8 A 32 V) as shown (fig. 4, page 4).
NOTE
The interior light switches off automatically after 30 minutes.
NOTICE! Damage hazard
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To Next Page
Loading...
Need help?
General
