MCG15 Function description
9
5 Function description
The cooler can chill products and keep them cool. A low maintenance refrig-
erant circuit with compressor provides the cooling. The generous insulation
and powerful compressor ensure efficient and fast cooling.
The cooler is portable.
The cooler can withstand a short-term inclination of 30°, for example on boats.
5.1 Scope of functions
A battery monitor to protect the vehicle battery switches off automatically
at low battery voltage
Electronic system to prevent polarity reversal
Display with temperature gauge
5.2 Operating and display elements
Lid latch (fig. 1, page 3)
Operating panel (fig. 2, page 3)
Item Description Explanation
1
POWER
“P”
Switches the cooler on or off when the button is pressed for
two seconds
2 Display screen Shows the information
3 “+” To increase the value press the button once.
4 To enter setting mode press the button once.
To set the temperature ( –18 °C to +20 °C) press the button
twice and choose a value using “+” and “-”. The set tempera-
ture will flash 3 times. The flashing temperature will be saved
after 5 seconds.
To set the brightness press the button three times and choose
a value using “+” and “-” (Bright d0 > d1 > d2 Dark).
The setting button will be locked automatically after
15 seconds without any operation.
To unlock the buttons press this button for 3 seconds. A beep-
ing sound confirms the unlocking.
MobicoolMCG15_OPM_4445103306_EMEA16_202x-xx-xx.book Seite 9 Freitag, 16. April 2021 2:17 14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
