S13, S24, S28, S32 Technical description
7
4 Technical description
The cool bag is designed for mobile use. It can cool down or keep products
cool up to 15 °C below ambient temperature.
It can be folded together to a compact size when empty.
You can store the 12 V connection cable and the rectifier (S28 DC/AC,
S32 DC/AC only) in a pocket on the side (fig. 1, page 3).
Its cooling system is a non-wearing and CFC-free Peltier cooling, the heat is
discharged by a fan.
S32
A single drinks bottle can be removed via the bottle hatch (fig. 2, page 3).
5 Operation
I
Note
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic re-
asons (please also refer to the chapter “Cleaning and mainte-
nance” on page 8).
Energy saving tips
z Choose a well ventilated installation location which is protected against
direct sunlight.
z Allow warm food to cool down first before placing it in the device to keep
cool.
z Do not open the cooling device more often than necessary.
z Do not leave the cool bag open for longer than necessary.
Using the cool bag
I
Note
Like every cooling device, your cool bag must be properly ventila-
ted so that any heat created can dissipate. Otherwise proper func-
tioning cannot be ensured.
➤ Connect the 12 V connection cable into the cigarette lighter socket or a
12 V socket in the vehicle.
or
_S13_S24_S28_S32.book Seite 7 Mittwoch, 7. Mai 2008 2:07 14
To Next Page
Loading...
Need help?
General
