MobiPrint MP T3 - Indicators and Buzzer

１０
50 centimeter away from the printer’s infrared port. Make sure the two
ports are in front of each other with an angle of not more than 30° on the
four side.
3.4.3 Bluetooth Connection
PDA, Laptop and other communication devices with Bluetooth can drive T
Ⅲ
-BT to print by the Bluetooth interface. T
Ⅲ
-BT is compatible with
Bluetooth 2.0 protocol. Power grade is CLASS 2; effective communication
distance is 10 meters. The name of the printer is SPRT T
Ⅲ
, the initial
password is “1234”; users can change the printer name and password by
using〈TⅢ Setting Tools〉.
The method for the pairing between TⅢ-BT with the host device is:
1. Turn on the printer;
2. Host device searches for the outer Bluetooth device;
3. If there are other Bluetooth devices, please select SPRT T
Ⅲ
printer;
4. Put in password “1234”
5. Pairing finished.
Notice: If the printer name has been changed, please be sure not turn on
more than one printer, otherwise it will be difficult to justify which printer
been paired.
3.5 Indicators and Buzzer
There are three indicators for TⅢ printer, they are【MODE】,【FEED】
and 【 POWER】 indicator, the anterior two indicators are green, power
indicator has two colors: red and green. The following is the meaning of
each indicator denotes:
【
MODE
】
indicator:
Solid GREEN: printer is in setting status
Green LED blinking
（
one time
）
: printer out of paper
Green LED blinking （twice）: high temperature error
【FEED】indicator:
Solid GREEN: battery charging
Green LED off: battery at full charge
【POWER】indicator:
Solid GREEN: power on
Solid RED: low battery
The TⅢ uses a buzzer to indicate various status of the printer. The